Print Version (PDF) [ close ]   

Technical Data Sheet


Re-issued August 2007



EPIKURE™ Curing Agent 3192



Product Description

EPIKURE™ Curing Agent 3192 is a modified polyamidoamine supplied at 100 percent solids. It is designed for use with liquid epoxy resins in formulating high solids, high-build coatings. Such coatings are used in high solids, tile-like wall applications, corrosion resistant primers and topcoats for high performance maintenance coatings.


Application Areas/Suggested Uses

  • High performance maintenance coatings
  • Masonry coatings
  • Splash zone protective coatings



  • High solids formulations, 70 to 90 percent
  • No “sweat-out” of curing agent with proper induction time
  • Films exhibit excellent chemical, water and corrosion resistance


Sales Specification




Test Method/Standard

Amine value



ASTM D2896

Viscosity at 25°C



ASTM D2196




ASTM D1544






Typical Properties




Test Method/Standard

Equivalent weight, approx.







ASTM D1475

Non-volatile materials

% by wt.









General Information

Coatings formulated with EPIKURE Curing Agent 3192 at solids levels greater than 85 percent have a usable pot life of 1.5 to 2 hours. Such coatings, known as tile-like coatings, are generally applied to interior concrete block. Their high solids content bridges and fills the voids in the block, helping to promote a ceramic tile appearance.


Primers and enamels intended primarily for the protection of metallic substrates are formulated at volume solids levels of 65 percent to 75 percent. The additional organic solvent reduces the system to normal application viscosity and lengthens the pot life to 4 to 6 hours. An induction time of 30 to 60 minutes is required.


A properly formulated EPIKURE Curing Agent 3192 finishing system consisting of a corrosion resistant primer and two coats of enamel can be easily applied to yield a thickness of 15 to 20 mils film-forming solids. Such coatings systems exhibit outstanding humidity and salt spray resistance properties. Applied over sand-blasted steel panels at a dry film thickness of 15 mils, they easily withstand high humidity and salt fog environments for more than 1500 hours. The ability to withstand repeated splash and spillage of and immersion in water, dilute bases and organic/inorganic acids is typical of epoxy-amine coatings.



Safety, Storage & Handling

Please refer to the MSDS for the most current Safety and Handling information.


Please refer to the Hexion web site for Shelf Life and recommended Storage information.


Exposure to these materials should be minimized and avoided, if feasible, through the observance of proper precautions, use of appropriate engineering controls and proper personal protective clothing and equipment, and adherence to proper handling procedures. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheet (MSDS) for these and all other products being used are understood by all persons who will work with them. Questions and requests for information on Hexion Inc. ("Hexion") products should be directed to your Hexion sales representative, or the nearest Hexion sales office. Information and MSDSs on non-Hexion products should be obtained from the respective manufacturer.



Available in bulk and drum quantities.



Contact Information

For product prices, availability, or order placement, please contact customer service:


For literature and technical assistance, visit our website at:


® and ™ Licensed trademarks of Hexion Inc.


The information provided herein was believed by Hexion Inc. (“Hexion”) to be accurate at the time of preparation or prepared from sources believed to be reliable, but it is the responsibility of the user to investigate and understand other pertinent sources of information, to comply with all laws and procedures applicable to the safe handling and use of the product and to determine the suitability of the product for its intended use. All products supplied by Hexion are subject to Hexion’s terms and conditions of sale. HEXION MAKES NO WARRANTY, EXPRESS OR IMPLIED, CONCERNING THE PRODUCT OR THE MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE OR CONCERNING THE ACCURACY OF ANY INFORMATION PROVIDED BY HEXION, except that the product shall conform to Hexion’s specifications. Nothing contained herein constitutes an offer for the sale of any product.

Print Version (PDF) [ close ]