Print Version (PDF) [ close ]   

 

Technical Data Sheet 

 

Re-issued August 2013

 

EPIKURE™ Curing Agent 3115A

 

Product Description

EPIKURE™ Curing Agent 3115A is a high molecular weight, high viscosity, reactive polyamide, epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and easier handling, EPIKURE Curing Agent 3115A is also available in solutions of xylene at 70% solids. Other solutions may be made available upon request.

 

Application Areas/Suggested Uses

  • Maintenance and marine coatings
  • Tank and pipe linings
  • Masonry and pool coatings
  • Adhesives, caulks and grouts

Benefits

  • Superior water and corrosion resistance
  • Superior adhesion
  • Good pigment and substrate wetting
  • Good chemical resistance
  • Long pot life

Sales Specification

Property

Units

EPIKURE 3115A

Test Method/Standard

Amine value

mg/g

232-242

ASTM D2896

Viscosity at 40°C

P

550 - 700

ASTM D2196

Color

Gardner

9

ASTM D1544

Solids

%m/m

100

ASTM D1259

1  Amine Value is based on the solution

 

Typical Properties

Property

Units

EPIKURE 3115A

Test Method/Standard

Amine Hydrogen Equivalent weight

g/eq

156

Calculated

Flash point

°C

252

ASTM D93

Mix Ratio

 

 

 

         EEW 190

 

82

 

Density @ 25 °C

lbs./gal

8.1

 

Appearance

 

Clear

 

 

 

General Information

 

Safety, Storage & Handling

Please refer to the MSDS for the most current Safety and Handling information.

 

Please refer to the Hexion web site for Shelf Life and recommended Storage information.

 

Exposure to these materials should be minimized and avoided, if feasible, through the observance of proper precautions, use of appropriate engineering controls and proper personal protective clothing and equipment, and adherence to proper handling procedures. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheet (MSDS) for these and all other products being used are understood by all persons who will work with them. Questions and requests for information on Hexion, Inc. ("Hexion") products should be directed to your Hexion sales representative, or the nearest Hexion sales office. Information and MSDSs on non-Hexion products should be obtained from the respective manufacturer.

 

Packaging

Available in bulk and drum quantities.

 

Contact Information

For product prices, availability, or order placement, please contact customer service:

www.hexion.com/Contacts/

 

For literature and technical assistance, visit our website at: www.Hexion.com/Epoxy

® and ™ Licensed trademarks of Hexion Inc.

DISCLAIMER

The information provided herein was believed by Hexion Inc. (“Hexion”) to be accurate at the time of preparation or prepared from sources believed to be reliable, but it is the responsibility of the user to investigate and understand other pertinent sources of information, to comply with all laws and procedures applicable to the safe handling and use of the product and to determine the suitability of the product for its intended use. All products supplied by Hexion are subject to Hexion’s terms and conditions of sale. HEXION MAKES NO WARRANTY, EXPRESS OR IMPLIED, CONCERNING THE PRODUCT OR THE MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE OR CONCERNING THE ACCURACY OF ANY INFORMATION PROVIDED BY HEXION, except that the product shall conform to Hexion’s specifications. Nothing contained herein constitutes an offer for the sale of any product.

Print Version (PDF) [ close ]