EPON Resin 1001-H-75 is a solid resin solution of EPON Resin 1001F cut to 75% weight in Propylene Glycol Methyl Ether (PGME). PGME is not regulated as a Hazardous Air Pollutant (HAP) under Title III of the 1990 Clean Air Act Amendments. The EPON Resin 1001F is derived from bisphenol-A and epichlorohydrin. This epoxy resin solution finds application in solventborne amine or polyamide cured coatings and as a modifying resin in solventborne thermosetting acrylic coatings
Safety, Storage & Handling
Please refer to the MSDS for the most current Safety and Handling information.
Please refer to the Hexion web site for Shelf Life and recommended Storage information.
Alcohols and glycol ethers have a tendency to react with epoxide groups under certain conditions. As such, the weight per epoxide (WPE) and solution viscosity of this product will increase with time. Use oldest lots first and maintain modest inventories.
Exposure to these materials should be minimized and avoided, if feasible, through the observance of proper precautions, use of appropriate engineering controls and proper personal protective clothing and equipment, and adherence to proper handling procedures. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheet (MSDS) for these and all other products being used are understood by all persons who will work with them. Questions and requests for information on Hexion Inc. ("Hexion") products should be directed to your Hexion sales representative, or the nearest Hexion sales office. Information and MSDSs on non-Hexion products should be obtained from the respective manufacturer.
Available in bulk and drum quantities.
For product prices, availability, or order placement, please contact customer service:
For literature and technical assistance, visit our website at: www.hexion.com