Please confirm your preference
Europe, Middle East, Africa
Asia Pacific

EPON™ Resin 2024


EPON™ Resin 2024 is a solid bisphenol A/epichlorohydrin epoxy resin that contains half a percent weight of the flow control agent, MODAFLOW1. This resin is designed specifically for formulators of thin-film functional/decorative powder coatings who desire to have the flow control agent evenly dispersed throughout the resin. EPON Resin 2024 is recommended for use in powder coatings for appliances, metal shelving, institutional furniture and automotive parts. In addition, it can be used in thick-film functional pipe and electrical insulation coatings.


  • Uniform properties from lot to lot
  • Filtered to remove particulate contaminants
  • Low in color
  • Stable on storage
  • Flows evenly and cures rapidly at elevated temperatures
  • Provides consistent cure response with a wide variety of curing agents

Sales Specification

Property Standard Value Unit Test Method
Color 100 max Platinum-Cobalt ASTM D1209
Viscosity at 25°C 17 - 26 cP ASTM D445
Weight per Epoxide 850 - 950 ASTM D-1652

Typical Properties

Property Standard Value Unit Test Method
Bulk Density 36 - 42 lb/ft³
Density 1.18 g/mL
Density 1.18 g/mL
Melt Viscosity at 150°C 60 - 120 P ASTM D2196
Mettler Softening Point 95 - 105 °C ASTM D-3461
MODAFLOW Content 0.5 ± 0.05 %

1 MODAFLOW is a trademark of Solutia Inc.
2 ASTM D 1652 (Epoxy Content of Epoxy Resins - Perchloric Acid Method).
3 ASTM D 445 (Kinematic Viscosity - Determination of viscosity of liquids by Ubelohde Viscometer).
4 ASTM D 1209 (Platinum-Cobalt Scale).
5 Density of Powder Coating Materials, The Powder Coating Institute, Recommended Procedure #4.
6 ASTM D 2196 (Brookfield Viscometer - Thermosel, about 10 grams)
7 ASTM D 3461, Mettler, 1 °C/minute.