Print Version (PDF) [ close ]   

Technical Data Sheet

 New AquaBond

 

AquaBond™

Premium Resin Coated Sand with Stress Bond™ Technology

 

DESCRIPTION

AquaBond™ proppants are one of our latest innovative technology platforms available in 20/40, 30/50, and 40/70 mesh sizes. These advanced proppants utilize a unique resin chemistry that reduces the production of formation water by altering the relative permeability of water through the proppant pack.  This increases the profitability of the well by reducing waste water storage and disposal costs.

 

TYPICAL APPLICATIONS  

Fracture treatments:     

  • At closure stress up to 10,000 psi [69 MPa]  
  • At bottom-hole static temperatures from 120 - 450°F [49 - 232°C]
  • Vertical and horizontal wells
  • Refracs
  • Any well where water production is an issue

TECHNICAL ADVANTAGES AND BENEFITS  

  • Reduces the production of formation water while maintaining oil and gas production
  • Minimizes proppant flowback
  • Reduces proppant fines generation and migration
  • Minimizes proppant embedment
  • Stress Bond™ technology helps prevent wellbore consolidation
  • Frac fluid and beaker friendly

TECHNICAL CONSIDERATIONS

  • Grain-to-grain contact must occur and closure stress must be applied during the cure period for proper bonding

Chemical Properties

Typical

Composition

resin coated frac sand

Resin Type

thermosetting, curable

Color light blue

Solubility, weight %

 

in water, brine & HCl

nil

in HCl/HF acid, API RP 19C

≤ 0.3

in oil

nil

Compatibility

Fully compatible with most commonly used fracturing fluids, both water and oil-based systems. Testing with fluids prior to pumping is advised.

Physical Properties

Typical

API Mesh Size

20/40, 30/50, 40/70

Physical State

solid granule

Specific Gravity

2.56, 2.55, 2.59

Bulk Density

 

g/cm3 [lb/gal]

1.60 [13.4], 1.51 [12.6], 1.46 [12.2]

Pipe Fill Factor

 

cm3/g [gal/lb]

0.625 [0.0749], 0.662 [0.0793], 0.685 [0.0821]

Absolute Volume  
cm3/g [gal/lb]

0.391 [0.0469], 0.392 [0.0470], 0.386 [0.0463]

Median Particle Diameter (mm) 0.6538, 0.4396, 0.3154

Particle Size Distribution

meets or exceeds API RP 19C

Turbidity, NTU (FTU)

≤ 250

 5/15

 
 

Contact Information

Hexion

Oilfield Technology Group

15366 Park Row  

Houston, Texas 77084 USA

+1 281 646 2800   

www.hexion.com/oilfield

Customer Service 

+1 800 626 2116

otg.customerservice@hexion.com

Technical Inquiries

otg.customerservice@hexion.com


 
® and ™ Licensed trademarks of Hexion Inc.

DISCLAIMER

The information provided herein was believed by Hexion Inc. (“Hexion”) to be accurate at the time of preparation or prepared from sources believed to be reliable, but it is the responsibility of the user to investigate and understand other pertinent sources of information, to comply with all laws and procedures applicable to the safe handling and use of the product and to determine the suitability of the product for its intended use. All products supplied by Hexion are subject to Hexion’s terms and conditions of sale. HEXION MAKES NO WARRANTY, EXPRESS OR IMPLIED, CONCERNING THE PRODUCT OR THE MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE OR CONCERNING THE ACCURACY OF ANY INFORMATION PROVIDED BY HEXION, except that the product shall conform to Hexion’s specifications. Nothing contained herein constitutes an offer for the sale of any product.

Print Version (PDF) [ close ]