Print Version (PDF) [ close ]   

Technical Data Sheet

 kRT 100


kRT 100™

Economical Resin Coated 100 Mesh Sand with Stress Bond™ Technology



Hexion’s kRT 100™ proppant is an economical, curable resin coated sand now available in 100 mesh. The resin coating supports the intended use of 100 mesh within the fracture network, but now provides all the traditional benefits of a resin coated sand such as proppant flowback control and fewer proppant fines. Additionally, the tailored resin system reduces dust generation, which helps improve health and safety on location.



Fracture treatments:     

  • At closure stress up to 12,000 psi [83 MPa]  
  • At bottom-hole static temperatures from 130 - 400°F [54 - 204°C]
  • Where smaller mesh size curable resin coated proppants are desired


  • Helps prevent flowback and rearrangement
  • Reduces proppant fines generation and migration
  • Reduces dust generation
  • Stress Bond™ technology helps prevent wellbore consolidation


  • Grain-to-grain contact must occur and closure stress must be applied during the cure period for proper bonding

Chemical Properties



resin coated frac sand

Resin Type

thermosetting, curable

Color light gray

Solubility, weight %


in water, brine & HCl


in HCl/HF acid, API RP 19C

≤ 0.3

in oil



Fully compatible with most commonly used fracturing fluids, both water and oil-based systems. Testing with fluids prior to pumping is advised.

Physical Properties


Mesh Size


Physical State

solid granule

Specific Gravity


Bulk Density


g/cm3 [lb/gal]

1.42 [11.9]

Pipe Fill Factor


cm3/g [gal/lb]

0.704 [0.0840]

Absolute Volume  
cm3/g [gal/lb]

0.383 [0.0459]

Particle Size Distribution

meets or exceeds API RP 19C

Turbidity, NTU (FTU)

< 250



Contact Information


Oilfield Technology Group

15366 Park Row  

Houston, Texas 77084 USA

+1 281 646 2800

Customer Service 

+1 800 626 2116

Technical Inquiries


® and ™ Licensed trademarks of Hexion Inc.


The information provided herein was believed by Hexion Inc. (“Hexion”) to be accurate at the time of preparation or prepared from sources believed to be reliable, but it is the responsibility of the user to investigate and understand other pertinent sources of information, to comply with all laws and procedures applicable to the safe handling and use of the product and to determine the suitability of the product for its intended use. All products supplied by Hexion are subject to Hexion’s terms and conditions of sale. HEXION MAKES NO WARRANTY, EXPRESS OR IMPLIED, CONCERNING THE PRODUCT OR THE MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE OR CONCERNING THE ACCURACY OF ANY INFORMATION PROVIDED BY HEXION, except that the product shall conform to Hexion’s specifications. Nothing contained herein constitutes an offer for the sale of any product.

Print Version (PDF) [ close ]