Print Version (PDF) [ close ]   

 

Technical Data Sheet

 True North L

 

True North™ L

Canadian Ultra-Low Temperature Resin Coated Sand with Stress Bond™ Technology

 

DESCRIPTION

True North™ L proppants are an Innovative curable resin coated sand available in a 20/40 mesh size. The True North L resin system is specifically designed for low temperature reservoirs and is applied to Canadian (domestic) frac sand. Incorporating Hexion's latest Stress Bond™ technology, the proppant bonds in the fracture with closure stress, providing increased fracture flow capacity and proppant flowback control. Additionally, the resin system reduces dust generation during the pneumatic transfer* and conveying process, which helps improve health and safety on location.

 

TYPICAL APPLICATIONS  

Fracture treatments:     

  • At closure stress up to 55 MPa [8,000 psi]
  • At bottom-hole static temperatures from 21-71°C [70-160°F]
  • Where flowback control is necessary in low temperature reservoirs

TECHNICAL ADVANTAGES AND BENEFITS  

  • Low temperature bonding down to 21°C [70°F] bottom-hole static temperature without the use of a low temperature consolidation aid
  • Reduces proppant fines and migration
  • Reduces dust generation*
  • Helps prevent proppant flowback and rearrangement
  • Stress Bond technology helps prevent wellbore consolidation
  • Frac fluid and breaker friendly

TECHNICAL CONSIDERATIONS

  • Grain-to-grain contact must occur and closure stress must be applied during the cure period for proper bonding
  • Consolidation of curable product at bottom-hole static temperatures below 21°C [70°F] is achieved by use of Hexion's AcTivator™ low temperature consolidation aid

Chemical Properties

Typical

Composition

resin coated frac sand

Resin Type

thermosetting, curable

Color greenish-black to black

Solubility, weight %

 

in water, brine & HCl

nil

in HCl/HF acid, API RP 19C

≤ 0.3

Compatibility

Fully compatible with most commonly used fracturing fluids, both water and oil-based systems. Testing with fluids prior to pumping is advised.

Physical Properties

Typical

API Mesh Size

20/40

Physical State

solid granule

Specific Gravity

2.62

Bulk Density

 

g/cm3 [lb/gal]

1.43 [11.9]

Pipe Fill Factor

 

cm3/g [gal/lb]

0.699 [0.0838]

Absolute Volume  
cm3/g [gal/lb]

0.382 [0.0457]

Particle Size Distribution

meets or exceeds API RP 19C

Turbidity, NTU (FTU)

< 250

 11/15

*Compared to uncoated frac sand. Pneumatic transfer pressure not to exceed 5 psi.

 
 

Contact Information

Hexion Canada Inc.

Oilfield Technology Group

540-5th Ave. SW, Suite 1280 

Calgary, AB T2P-0M2

+1 403 705 0950  

www.hexion.com/oilfield

Customer Service 

+1 800 626 2116

otg.customerservice@hexion.com

Technical Inquiries

otg.customerservice@hexion.com


 
® and ™ Licensed trademarks of Hexion Inc.

DISCLAIMER

The information provided herein was believed by Hexion Inc. (“Hexion”) to be accurate at the time of preparation or prepared from sources believed to be reliable, but it is the responsibility of the user to investigate and understand other pertinent sources of information, to comply with all laws and procedures applicable to the safe handling and use of the product and to determine the suitability of the product for its intended use. All products supplied by Hexion are subject to Hexion’s terms and conditions of sale. HEXION MAKES NO WARRANTY, EXPRESS OR IMPLIED, CONCERNING THE PRODUCT OR THE MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE OR CONCERNING THE ACCURACY OF ANY INFORMATION PROVIDED BY HEXION, except that the product shall conform to Hexion’s specifications. Nothing contained herein constitutes an offer for the sale of any product.

Print Version (PDF) [ close ]