


Americas
Europe, Middle East, Africa
Asia Pacific
Our range of epoxy resin systems for prototyping suit VARTM, hand lay-up, and LP-RTM processing. These prototyping resins produce composites with mechanical properties comparable to those of our fast-cure HP-RTM systems. For help developing your prototype faster, partner with us through the Transportation Research and Application Center (TRAC) at our Duisburg, Germany plant.
Prototyping
EPIKOTETM Resin Systems | Suitability | Curing Conditions | |||||
---|---|---|---|---|---|---|---|
Mass Production | Class A Finish | Time[min] | Temp[oC] | Glass Transition Temp [°C] (DSC Midpoint) | Process | Typical Applications | |
EP TRAC 06150 EK TRAC 06150 | 30min + 60min postcure | 50oC + 60oC + postcure 130oC | 110oC + 120oC | LP-RTM | |||
Remarks:Comparable mechanical properties as with the fast-cure HP-RTM systems can be achieved. | |||||||
EP TRAC 06150 EK TRAC 06165 | 30min + 60min postcure | 50oC + 60oC + postcure 130oC | 110oC + 120oC | LP-RTM | |||
Remarks:Comparable mechanical properties as with the fast-cure HP-RTM systems can be achieved. | |||||||
EP MGSTM RIMR 935 EK MGSTM RIMH 936 | 120min + 60min postcure | 80oC + 90oC + postcure 130oC | 110oC + 120oC | VARTM Hand lay-up | |||
Remarks:Low viscosity infusion resin system for processing of woven and non-crimp multiaxial fabrics. 2h pot-life at 30oC. |