Please confirm your preference
Americas
Europe, Middle East, Africa
Asia Pacific

kRT 100™ Proppants

Description

kRT 100

Hexion’s kRT 100™ proppant is an economical, curable resin coated sand available in 100 mesh. The resin coating supports the intended use of 100 mesh within the fracture network, but now provides all the traditional benefits of a resin coated sand such as proppant flowback control and fewer proppant fines.

Typical Applications

Fracture treatments:     

  • At closure stress up to 12,000 psi [83 MPa]  
  • At bottom-hole static temperatures from 110 - 450°F [43 - 232°C]
  • Where smaller mesh size curable resin coated proppants are desired

Technical Advantages and Benefits

  • Enhanced conductivity
  • Proppant flowback control
  • Proppant fines reduction
  • Cyclic stress resistance
  • Minimizes proppant embedment
  • Reduces respirable silica dust exposure below PEL limits

Typical Properties

Property Standard Value Unit Test Method
Specific Volume 0.383 [0.0459] cm³/g [gal/lb]
Bulk Density 1.42 [11.9] g/cm³ [lb/gal]
Color tannish to grayish
Compatibility Fully compatible with most commonly used fracturing fluids, both water and oil-based systems. Testing with fluids prior to pumping is advised.
Composition resin coated, northern white frac sand
Mesh Size 100
Particle Size Distribution meets or exceeds API RP 19C
Physical State solid granule
Pipe Fill Factor 0.704 [0.0840] cm³/g [gal/lb]
Resin Type thermosetting, curable
Solubility in Water, Brine & HCl 0.0 weight %
Solubility in HCl/HF acid, API RP 19C < / = 3 weight %
Solubility In Oil 0.0 weight %
Specific Gravity 2.61
Turbidity < 250 NTU (FTU)

 
Welcome to Hexion eSecurity
Your platform for receiving secure content.
If you've received a notification, you can validate its authenticity by going to our validation page.