Duration: 8 ms, Number of Results: 8

Page 1 of 1
Product

EPON Resin 1001F

" Fusion Solids - Basic coating and prepreg resin; sinters upont storage." Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation or prepared from sources believed to be reliabl...

Product

EPIKURE Curing Agent P-100

"Application Methods: Typical methods include electrostatic spray, fluidized bed, electrostatic fluidized bed and flocking by gun. These systems require the incorporation of a bake cycle to cure the formulations. " "General Information:Blending by Extrusion: EPIKURE Curing Agent P-100 is a low melti...

Product

EPIKURE Curing Agent P-101

Imidazole adduct for rapid or low temperature cures, useful as an accelerator for other curatives. Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation or prepared from source...

Product

Cardura E10P Glycidyl Ester

" Cardura E10P glycidyl ester of Versatic Acid 10 is used as a buidling block for a wide variety of paint applications based on polyesters and acrylics. Cardura glycidyl ester is also used as reactive diluent for epoxy formulations." Sales Specification:[TableHere] *Epoxy Equivalent Weight, 235 &nda...

Product

EPON Resin 2002

" Powder Coating / Molding Powder Solids - Standard BPA based resin, melt point 80-90ºC." Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation or prepared from sources be...

Product

EPON Resin 1002F

" Fusion Solids - Sinter-resistant grade of EPON Resin 1001F" Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation or prepared from sources believed to be reliable, but it is ...

Product

EPON Resin 2024

" Powder Coating / Molding Powder Solids - Standard BPA based resin formulated with a flow control agent, melt point 95-105ºC." Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of p...

Product

EPIKURE Curing Agent P-108

" Imidazole adduct for rapid or low temperature cures, useful as an accelerator for other curatives." 08 - Shelf Life Definition: "Shelf Life" is the average time during which product properties can be expected to remain within product specifications set out in the applicable sales contrac...

Page 1 of 1