Please confirm your preference
Americas
Europe, Middle East, Africa
Asia Pacific

 

 

On February 1, 2022, Hexion Holdings Corporation announced that it has completed the sale of its Coatings and Composite businesses, which includes the epoxy specialty resins and base epoxy resins and intermediates product lines, to Westlake Chemical Corporation. For epoxy coatings and composite product inquiries, please contact customer service at https://www.hexion.com/en-US/company/contact/ or Service@hexion.com.

SF 1011 White Enamel 1001 3213

Description

White Enamel

EPON™ Resin 1001-CX-75 / EPIKURE™ Curing Agent 3213

Features

  • High performance chemical and solvent resistant topcoat
  • Formulated for spray application
  • Desirable mixing ration of 3 to 1 by volume
  • Formulation contains no ethylene glycol ether solvent

 

Formula

Material

Supplier

Pounds

Gallons

 

Part A

 

 

 

 

Pigments

 

 

 

 

      Ti-Pure R-960

Du Pont Company

240.2

6.87

 

      Phthalocyanine Blue

 

Trace

Trace

 

      Mistron CF5A

Luzenac America, Inc.

32.5

1.37

 

Vehicle

 

 

 

 

      EPON Resin 1001-CX-75

Hexion

264.4

29.06

 

      CYMEL U-216-8

Cytec Industries

12.1

1.43

 

      Methyl isobutyl ketone

Shell Chemical Company

29.8

4.48

 

 

High Speed Disperse to Grind Hegman 7-8

 

Propylene glycol methyl ether

 

55.4

7.24

 

Cyclohexanol

 

7.5

0.95

 

Xylene

Shell Chemical Company

35.8

5.00

 

Toluene

Shell Chemical Company

133.3

18.60

 

 

Total Part A

811.0

75.00

 

 

 

 

 

 

Part B

 

 

 

 

EPIKURE Curing Agent 3213

Hexion

98.4

12.00

 

Methyl isobutyl ketone

Shell Chemical Company

86.3

13.00

 

 

Total Part B

184.7

25.00

 

 

 

 

 

 

 

Total Part A & B

995.7

100.00

 

Mixing Instructions

 

 

Pounds

 

Gallons

 

Part A

811.0

75.00

 

Part B

184.7

25.00

 

Part A + B

995.7

100.00

 

 

 

Disperse the pigments in a suitable portion of the vehicle using high speed dispersing equipment or a sand mill. Let down the pigment dispersion with the remaining vehicle. Charge the two ingredients of the curing agent component to a separate suitable container and mix thoroughly. Package the base component and the curing agent component separately to be combined just prior to use.

 

Typical Handling Properties

Slowly combine three parts by volume of base component with one part by volume of curing agent component and mix thoroughly. Allow the mixed formulation to “sweat in” for one hour. The system is then ready for spray application. Because of the limited pot life of the mixed formulation, do not mix more material than can be used in a working day. For application of this system in confined or poorly ventilated areas, we recommend the use of a fresh air-supplied hood and other protective clothing sufficient to cover the applicator’s entire body.

 

The application methods for an EPON Resin 1001F/EPIKURE Curing Agent 3213 White Enamel can involve the use of air or airless spray equipment, roller or brush. This system is normally air dried but can be force cured by baking if desired. This operation requires the use of well ventilated facilities (fresh air supply and adequate exhaust) along with the use of OSHA/NIOSH approved respiratory equipment for worker protection. In addition, the worker must wear appropriate protective clothing to avoid skin contact.

 

Typical Formulation Properties

Table 1 / Formulation Properties

 

 

Units

Value

 

Mix ratio Part A : Part B

By volume

3 : 1

 

 

By weight

4.39:1.0

 

Curing agent (based on solids)

phr

49.5

 

Nonvolatile content by weight

%

51.6

 

Nonvolatile content by volume

%

32.7

 

Weight per gallon

lb./gal.

9.96

 

Pigment : Binder Weight Ratio

 

1.06

 

Pigment volume concentration (PVC)

%

25.2

 

Volatile Organic Compound (VOC)

lb/gal

4.76

 

 

g/L

571

 

Induction Time

hrs

1.0

 

Pot life

hrs

> 8

 

Cure Schedules

Table 2 / Cure Schedules

 

At ambient temperatures of 70°F to 80°F, this coating will dry to handle in about six hours. Physical properties will be fully developed in about two days. Chemical and solvent resistance will be fully developed in seven days. At ambient temperatures of 55°F, several weeks may be required to produce full cure, as the adduct curing agent used in the formulation has low volatility and will remain in the film to react with the epoxy resin.

 

 

Units

Value

 

 

Force dry, to a sandable stage

 

 

 

 

100°F

hrs

1.5 – 2

 

 

110°F

hrs

1 – 1.5

 

 

120°F

min.

45

 

 

140°F

min.

30

 

 

 

 

 

 

 

Force dry, to full cure

 

 

 

 

140°F

hrs

1.5

 

 

 

 

 

 

 

High temperature bake, to full cure

 

 

 

 

200°F

min.

20

 

 

250°F

min.

10

 

 

300°F

min.

7

 

 

350°F

min.

4

 

 

400°F

min.

2

 

 

Storage

Recommendations regarding storage conditions can be obtained by visiting our web site at www.hexion.com


 

General Information

These are starting formulations and are not proven in the user’s particular application but are simply meant to demonstrate the efficacy of the products and to assist in the development of the user’s own formulation.  It is the user’s responsibility to fully-test and qualify the formulation, along with the ingredients, methods, applications or equipment identified herein (“Information”), by the user’s knowledgeable formulator or scientist, and to determine the appropriate use conditions and legal restrictions, prior to use of any Information.

 

Safety, Storage & Handling

Please refer to the MSDS for the most current Safety and Handling information.

 

Exposure to these materials should be minimized and avoided, if feasible, through the observance of proper precautions, use of appropriate engineering controls and proper personal protective clothing and equipment, and adherence to proper handling procedures. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheet (MSDS) for these and all other products being used are understood by all persons who will work with them. Questions and requests for information on Hexion Inc. ("Hexion") products should be directed to your Hexion sales representative, or the nearest Hexion sales office. Information and MSDSs on non-Hexion products should be obtained from the respective manufacturer.

 

 

Contact Information

For product prices, availability, or order placement, please contact customer service:

www.hexion.com/Contacts/

 

 

For literature and technical assistance, visit our website at: www.hexion.com

 

 
Welcome to Hexion eSecurity
Your platform for receiving secure content.
If you've received a notification, you can validate its authenticity by going to our validation page.