Please confirm your preference
Américas
EMEA
Asia Pacific

XRT™ Ceramax™ E Proppants

Description

XRT Ceramax E Product Photo

XRT™ Ceramax™ E proppants are a cost effective solution available in a 20/40 mesh size for use in a broad range of field applications. Use of the eXtreme Resin Technology (XRT) system to encase an economy ceramic has yielded a proppant with high fracture flow capacity and resistance to cyclic stress.

Typical Applications

Fracture treatments:

  • At closure stress up to 12,000 psi [83 MPa]
  • At bottom-hole static temperatures from 175 - 450°F [79 - 232°C]
  • That require proppant flowback prevention, especially under sever stress cycling
  • When wellbore clean-out is a concern
     

Technical Advantages and Benefits

  • Higher conductivity than uncoated ceramics
  • Proppant flowback control even under extreme conditions utilizing Stress Bond™ technology
  • Superior cyclic stress resistance
  • Temperature stability for both extended pumping and storage times
  • Increases near wellbore conductivity over uncoated ceramics

Typical Properties

Property Standard Value Unit Test Method
API Mesh Size 20/40
Bulk Density 1.44 [12.0] g/cm³ [lb/gal]
Color yellowish-brown
Compatibility Fully compatible with most commonly used fracturing fluids, both water and oil-based systems. Testing with fluids prior to pumping is advised.
Composition resin coated ceramic
Particle Size Distribution meets or exceeds API RP 19C
Physical State solid granule
Pipe Fill Factor 0.694 [0.0833] cm³/g [gal/lb]
Resin Type thermosetting, curable
Solubility in Water, Brine & HCl nil weight %
Solubility in HCl/HF acid, API RP 19C ≤ 3 weight %
Solubility In Oil nil weight %
Specific Gravity 2.50
Specific Volume 0.400 [0.0478] cm³/g [gal/lb]
Turbidity < 300 NTU (FTU)