Please confirm your preference
Europe, Middle East, Africa
Asia Pacific

EPON™ Resin 1001-H-75


EPON Resin 1001-H-75 is a solid resin solution of EPON Resin 1001F cut to 75% weight in Propylene Glycol Methyl Ether (PGME). PGME is not regulated as a Hazardous Air Pollutant (HAP) under Title III of the 1990 Clean Air Act Amendments. The EPON Resin 1001F is derived from bisphenol-A and epichlorohydrin. This epoxy resin solution finds application in solventborne amine or polyamide cured coatings and as a modifying resin in solventborne thermosetting acrylic coatings.


  • Easy handling solution that is readily thinned or reduced with other organic solvents
  • Crystal clear solution requiring no additional filtration
  • PGME is a medium evaporating, non-HAP solvent readily adaptable to most air dry or baking systems
  • Toxicological studies indicate that PGME is one of the least hazardous medium boiling glycol ethers available

Sales Specification

Property Standard Value Unit Test Method
Color 3 max. Gardner ASTM D1544
Solids 74 - 76 % wt. ASTM D1259
Viscosity 1 at 25°C Z2 – Z7 Gardner ASTM D1545
Weight per Epoxide Based on Nonvolatiles 450 - 600 g/eq ASTM D1652

1 ASTM D1545 (Gardner-Holdt - Bubble Time Method), determined on resin solution as supplied.

Typical Properties

Property Standard Value Unit Test Method
Density at 25°C, Solution 9.2 lb/gal ASTM D1475
Nonvolatiles 74 - 76 %
Solvent              Propylene glycol methyl ether
Specific Gravity 1.108 g/mL
Vapor Pressure @ 25°C (Estimated) 9.5 mm Hg

Welcome to Hexion eSecurity
Your platform for receiving secure content.
If you've received a notification, you can validate its authenticity by going to our validation page.