Create the future with lower yellowing, renewable resins and raw materials
1 2 3 4 5 Next Page 1 of 25
Product

VeoVa™ 10 Monomer

" VeoVa 10 Monomer is the vinyl ester of Versatic Acid 10. VeoVa 10 Monomer is widely used as a modifying co-monomer in the manufacture of vinyl acetate based polymer latices. VeoVa 10 is also used for the production of VeoVa 10/(meth)acrylic latices and solution polymers." Disclaimer: ® and &tr...

Product

EPI-REZ Resin 5003-W-55

Waterborne dispersion of an epoxidized Bisphenol A novolac resin with an average functionality of 3 (EPON SU-3 type). Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation or p...

Recipe

SF 4020 One-Package Cure Adhesive 828

" EPON™ Resin 828 Introduction This accelerated one-package Epoxy/DICY adhesive, properly formulated, can yield over three months pot life when stored at normal room temperature, yet develops good bond strengths on relatively short cure schedules of 30 minutes at 149 °C or 40 minutes at 13...

Product

EPON Resin 826

" Unmodified Liquid Resin - A low viscosity resin. Possesses performance properties similar to EPON Resin 828. Capable of accepting higher filler levels. Subject to crystallization when cold." Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believ...

Product

EPIKOTE Resin 828

" General purpose bisphenol A resin. A base resin used for its balance of handling characteristics and performance properties." Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of prepar...

Product

EPI-REZ Resin 6520-WH-53

Waterborne dispersion of a solid Bisphenol A epoxy resin (EPON 1001-type)with a non HAPS co-solvent. Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation or prepared from sour...

Recipe

SF 6017 Waterborne Self-Leveling 8535-W-60 3510-W-60

" Waterborne Self-Leveling Flooring Formulation EPI-REZ™ Resin 3510-W-60 / EPIKURE™ Curing Agent 8535-W-50 Features 100% waterborne - No cosolvents Fast hardness development Early water-resistance Recommended for use on concrete as a self leveling flooring formulation Formula Material Su...

Product

EPIKURE Curing Agent P-100

"Application Methods: Typical methods include electrostatic spray, fluidized bed, electrostatic fluidized bed and flocking by gun. These systems require the incorporation of a bake cycle to cure the formulations. " "General Information:Blending by Extrusion: EPIKURE Curing Agent P-100 is a low melti...

Product

EPI-REZ Resin 3510-W-60 Europe

" EPI-REZ Resin 3510-W-60 is a moderate viscosity, non-ionic, aqueous dispersion of a bisphenol A epoxy resin similar to EPIKOTE Resin 828." Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the t...

Product

EPIKOTE Resin 7510-W-60A

" EPIKOTE Resin 7510-W-60A is a nonionic, waterborne emulsion of a liquid BPA epoxy resin." Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation or prepared from sources belie...

Product

HELOXY Modifier 48

Polyfunctional Glycidyl Ether - Trifunctionality increases crosslink density. Maintains or increases reactivity. Relatively efficient viscosity reducer. Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accur...

Recipe

SF 1728 Waterborne Gray Midcoat 6520 6870 (less than 100 g/L VOC)

" Waterborne Gray Midcoat – 3:1 Ratio EPI-REZ™ Resin 6520-WH-53 / EPIKURE™ Curing Agent 6870-W-53 Introduction This formulation is designed as a mid-coat between an epoxy based primer and an acrylic topcoat. It is a rapid drying, low VOC coating with a convenient combining ratio (3...

Product

EPON Resin 828

Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation or prepared from sources believed to be reliable, but it is the responsibility of the user to investigate and understand o...

Product

EPIKOTE Resin 862

" Low viscosity bisphenol F resin. High performance alternative for EPIKOTE 828 blends." Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation or prepared from sources believed...

Product

EPIKURE Curing Agent P-108

" Imidazole adduct for rapid or low temperature cures, useful as an accelerator for other curatives." FDA Acceptability:Please note that some of the EPIKURE Curing Agents P-Series (P-101, P-103, P-104 and P-108) contain a component not specifically listed in 21 CFR. We have conducted extraction test...

Recipe

SF 1806 Red Oxide Primer 3520 8536

" Red Iron Oxide Primer EPI-REZ™ Resin 3520-WY-55 / EPIKURE™ Curing Agent 8536-MY-60 Formula Material Supplier Pounds Gallons Part A 2-Propoxyethanol 11.6 1.50 Lutensol OP-10 BASF Chemical Co. 3.5 0.39 Tamol 731 Surfactant Rohm & Haas Co. 3.5 0.38 Q148 Defoamer Troy Chemical Co. 4.0 ...

Product

EPI-REZ Resin 3520-WY-55

Waterborne dispersion of a semi-solid Bisphenol A epoxy resin (EPON 1001-type) with an organic co-solvent. Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation or prepared fro...

Product

EPON Resin 1001-X-75

" For Ambient Cure Applications - Epoxy resin solution, 75% solids in xylene." Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation or prepared from sources believed to be rel...

Product

EPIKOTE Resin 874-X-90

" Modified epoxy resin, supplied as a xylene solution. Especially for high-solids coatings i.e. solvent-borne coatings with solids content in the region of 85-90%w. Both primers and top coats." Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was belie...

Recipe

SF 8017: Epoxy Resin System 826 862 LS-81K

" Epoxy Resin System for Pultrusion or Filament Winding EPON™ Resin 826 or EPON™ Resin 862 / LS-81K Anhydride Curing Agent (MTHPA) Introduction EPON Resin 826 or EPON Resin 862/LS-81K Curing Agent system is based on an epoxy resin cured with an anhydride. LS-81K Curing Agent is a formula...

Recipe

SF 1036 Coating Wet Surfaces 828 3125

" Coating for Application to Wet Surfaces (Fresh & Salt Water) EPON™ Resin 828 / EPIKURE™ Curing Agent 3125 Suggested Uses Recommended to arrest corrosion in splash-zone areas of bulkheads, pilings, bridge abutments, drilling rigs and other marine structures Features Adheres to wet s...

Product

EPIKURE Curing Agent 3274

" Low color. Provides blush and sweat-out free films. Applications include glaze and high build coatings, FRP, decoupage, encapsulation and casting compounds." Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to b...

Recipe

SF 1729 WB Red Primer 6520 6870 (less than 100 g/L VOC)

" Waterborne Red Iron Oxide Primer – 3:1 Ratio EPI-REZ™ Resin 6520-WH-53 / EPIKURE™ Curing Agent 6870-W-53 Introduction This waterborne red iron oxide primer is designed as an alternative to solvent borne epoxy/polyamide based primers. This is a low VOC formulation with a convenien...

Product

EPON Resin 825

" Unmodified Liquid Resin - Bisphenol A diglycidyl ether, high purity resin. Strong crystallization tendency." Disclaimer: ® and ™ Licensed trademarks of Hexion Inc. The information provided herein was believed by Hexion Inc. ( Hexion ) to be accurate at the time of preparation or prepared...

1 2 3 4 5 Next Page 1 of 25