Please confirm your preference
Europe, Middle East, Africa
Asia Pacific

EPON™ Resin 1001-O-75


EPON™ Resin 1001-O-75 is a solid resin solution of EPON Resin 1001F cut to 75% weight in Methyl n-Amyl Ketone(Mn-AK). The EPON Resin 1001F is derived from bisphenol A and epichlorohydrin. This epoxy resin solution finds application in solventborne amine or polyamide cured coatings.

The 1990 Clean Air Act Amendments require significant reductions in the emissions of certain EPA-defined hazardous air pollutants (HAP). A number of the targeted substances are solvents commonly used in ambient cured coatings. EPON Resin 1001-O-75 offers the coatings formulator a resin solution with high solids and good solubility, using a non-HAP solvent.


  • Contains a non-HAP solvent (Methyl n-Amyl Ketone).
  • Mn-AK is a slower-evaporating solvent (comparable to propylene glycol monomethyl ether acetate) that is adaptable to most air-dry or baking systems.
  • Easy handling solution that is readily thinned or reduced with other organic solvents.
  • Crystal clear solution requiring no additional filtration.

Sales Specification

Property Standard Value Unit Test Method
Color 3 max. Gardner ASTM D1544
Solids 74 - 76 % wt. SRC 09Q16
Weight per Epoxide Based on Nonvolatiles 450 - 550 g/eq ASTM D1652

1 ASTM D1545 (Gardner-Holdt - Bubble Time Method), determined on resin solution as supplied.

Typical Properties

Property Standard Value Unit Test Method
Density at 25°C, Solution 9.0 lb/gal
Solvent              Methyl n-Amyl Ketone
Specific Gravity 1.08 g/mL
Vapour Pressure @ 25°C (Estimated) 1.4 mm Hg
Viscosity 1 at 25°C Z1 – Z6 Gardner ASTM D1545

Welcome to Hexion eSecurity
Your platform for receiving secure content.
If you've received a notification, you can validate its authenticity by going to our validation page.