Please confirm your preference
Americas
Europe, Middle East, Africa
Asia Pacific

 

 

On February 1, 2022, Hexion Holdings Corporation announced that it has completed the sale of its Coatings and Composite businesses, which includes the epoxy specialty resins and base epoxy resins and intermediates product lines, to Westlake Chemical Corporation. For epoxy coatings and composite product inquiries, please contact customer service at https://www.hexion.com/en-US/company/contact/ or Service@hexion.com.

SF 1018 Gray Enamel 1001 3115

Description

Gray Enamel
EPON™ Resin 1001-CX-75 / EPIKURE™ Curing Agent 3115-X-70

Formula

Material

Supplier

Pounds

Gallons

 

Part A

 

 

 

 

Ti-Pure R-610

Du Pont Company

100.0

2.86

 

Lampblack

 

8.0

0.54

 

Bentone 38

Rheox, Inc.

2.0

0.13

 

Imperial Anti-Flooding (IAF) Compound X-2280

RLM Industries, Inc.

3.0

0.14

 

EPON Resin 1001-CX-75

Hexion

323.0

36.00

 

SYN-U-TEX™ 402 Amino Resin

Shell Chemical Company

12.9

1.50

 

Butyl OXITOL™ Glycol Ether

Shell Chemical Company

37.5

5.00

 

Xylene

 

27.4

3.83

 

 

Total Part A

513.8

50.00

 

 

 

 

 

 

Part B

 

 

 

 

EPIKURE Curing Agent 3115-X-70

Hexion

185.5

23.80

 

2-Propoxyethanol

 

37.5

5.00

 

Xylene

 

152.0

21.20

 

 

Total Part B

375.0

50.00

 

 

 

 

 

 

 

Total Part A & B

888.8

100.00

 

Mixing Instructions

 

 

Pounds

 

Gallons

 

Part A

513.8

50.00

 

Part B

375.0

50.00

 

Part A + B

888.8

100.00

 

Typical Formulation Properties

Table 1 / Formulation Properties

 

 

Units

Value

 

Application

Brush or Spray

 

Allow 1 hour induction prior to application and 48 hours before recoating

 

Cure Schedule

Room Temperature cure

 

Weight per gallon

lb/gal

8.88

 

Total weight solids

%

55.4

 

Vehicle solids

%

49.0

 

Pigment volume concentration (PVC)

%

8.2

 

Volatile Organic Compound (VOC)

lb/gal

3.95

 

 

g/L

475

 

Viscosity @ 25°C

Part A

Part B

Part A & B

 

KU

KU

KU

 

84

12 sec

62

 

 

 

 

 

 

Storage

Recommendations regarding storage conditions can be obtained by visiting our web site at www.hexion.com

 

 

General Information

These are starting formulations and are not proven in the user’s particular application but are simply meant to demonstrate the efficacy of the products and to assist in the development of the user’s own formulation.  It is the user’s responsibility to fully-test and qualify the formulation, along with the ingredients, methods, applications or equipment identified herein (“Information”), by the user’s knowledgeable formulator or scientist, and to determine the appropriate use conditions and legal restrictions, prior to use of any Information.

 

Safety, Storage & Handling

Please refer to the MSDS for the most current Safety and Handling information.

 

Exposure to these materials should be minimized and avoided, if feasible, through the observance of proper precautions, use of appropriate engineering controls and proper personal protective clothing and equipment, and adherence to proper handling procedures. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheet (MSDS) for these and all other products being used are understood by all persons who will work with them. Questions and requests for information on Hexion Inc. ("Hexion") products should be directed to your Hexion sales representative, or the nearest Hexion sales office. Information and MSDSs on non-Hexion products should be obtained from the respective manufacturer.

 

 

Contact Information

For product prices, availability, or order placement, please contact customer service:

www.hexion.com/Contacts/

 

For literature and technical assistance, visit our website at: www.hexion.com

 

 
Welcome to Hexion eSecurity
Your platform for receiving secure content.
If you've received a notification, you can validate its authenticity by going to our validation page.